Every SuperSprings installation should be completed in less than an hour. Most will take 30 minutes or less.
The tools required to complete your installation are:
- 1 - Jack – capable of taking the weight off the rear suspension
- 1 – Jack stand
- 2 – ¾” wrench – for securing all SuperSprings hardware
- 1 – C Clamp
To complete your installation no specialty suspension knowledge is required. However, an understanding of basic automotive repair or maintenance, combined with some solid common sense and the ability to read and follow our step-by-step instructions will ensure that the installation is completed correctly, safely and in a timely manner. Should you not feel qualified to complete this task your local mechanic should be able to do so for a nominal (usually one hour shop rate) fee. Also, please make use of our toll free tech support line for any installation questions you have.
For your spring specific installation instructions please match up your SuperSprings model number with the appropriate installation instructions listed below. Again, if for any reason you are unclear about any portion of our instructions, call our toll free tech line @ 866-898-0720
  |
 |
|
 |